63
Using the TV’s features
Tuning channels using the Channel Browser
Tuning to a specific channel (programmed or unprogrammed)
To tune analog channels:
Press the Channel Number (
0–9
) on the remote control. For
example, to select channel 125, press
1
,
2
,
5
, and then press the
ENTER
button.
Tuning digital channels:
Press the Channel Number (
0–9
) on the remote control, followed by
the (
Dash 100
) button, and then the sub-channel number. For
example, to select digital channel 125-1, press
1
,
2
,
5
, –, 1, and then
press the
ENTER
button.
If a digital channel is not programmed, either through the automatic
channel scan or the Channel add function (see
), you will have to tune the RF channel using the Channel
Numbers and the (Dash 100) button on the remote control.
Switching between two channels using Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number buttons
(and the (
Dash 100)
button if selecting a digital channel).
3
Press the
CH RTN
button on the remote control.
The previous channel will display. Each time you press the
CH RTN
button, the TV will switch back and forth between
the last two channels that were tuned.
If you press the CH RTN button from a non-antenna input, the TV will
return to the last-viewed input.
Switching between two channels using SurfLock™
The SurfLock™ feature temporarily “memorizes” one channel to
the
CH RTN
button, so you can return to that channel quickly from
any other channel by pressing the
CH RTN
button.
To memorize a channel to the
CH RTN
button:
1
Tune the TV to the channel you wish to program into the
CH RTN
button.
NOTE
NOTE
