background image

114

Chapter 8

Troubleshooting

General troubleshooting

Before calling a service technician, review this chapter or visit the 
Toshiba technical support Web site at 

support.toshiba.com

 fo

possible causes and solutions for the problem you are experiencing.

Before you begin to troubleshoot any problem, first unplug the TV 
from the AC wall outlet, wait approximately one minute, and then 
plug the TV back into the AC wall outlet. If the problem still exists, 
then you should attempt to troubleshoot the problem.

Black box on-screen.

The closed caption feature is set to one of the Text modes (T1, T2, 
T3, or T4). Set the closed caption feature to Off. For instructions, 
see 

“Using closed captions” on page 74

TV stops responding to controls.

If the TV stops responding to the buttons on the remote control or 
TV control panel and you cannot turn off the TV, then you should 
press and hold the 

POWER

 button on the TV control panel for 

several seconds to reset the TV. If the TV does not power off using 
this method, unplug the TV from the AC wall outlet, and then plug 
it back in.

If you cause a static discharge when touching the TV and the TV 
fails to function, simply unplug the TV from the AC outlet, and 
then plug it back in. The TV should return to normal operation.

Содержание 39L22U




































































































































Отзывы: