Copyright 2014
All Rights Reserved
Page
1
of
3
NOTE: PERSONAL AND CUSTOM PREFRERENCES WILL BE LOST UPON COMPLETION
OF THIS FIRMWARE UPDATE. PLEASE MAKE NOTE OF ANY PREFERENCE SETTINGS
PRIOR YOU START WITH THIS FIRMWARE UPDATE.
How to upgrade the Software
1
Connect the AC power and turn
“ON” the TV set.
2
The USB reader is located on the left or right of the cabinet near the side control/jack assembly as
shown in Figure-1.
Figure-1
3
Insert the “USB Drive” into the USB slot as shown in Figure-2.
Figure-2
