46
Setting up your TV
Storing channels in memory (optional)
A new set of Installation menu icons appears.
3
Open the
Terrestrial
menu, highlight
Input Configuration
,
and then press the
ENTER
button.
(Sample Image) Terrestrial menu - Input Configuration selection
4
Highlight
ANT/CABLE In
and press the ( / arrow) buttons
to select the input source (
Cable
or
Antenna
).
(Sample Image) Input Configuration screen
5
To save your new settings, highlight
Done
, and then press the
ENTER
button. To revert to your original settings, highlight
Cancel
, and then press the
ENTER
button.
Storing channels in memory (optional)
To make sure your TV stops only on the channels you want when
you press the
CH
( / arrow) buttons on the remote control or the
control panel, store those channels in the TV’s memory.
Auto Tuning
You can set up the TV to detect all active channels in your area and
store them in its memory.
