226
If Something Goes Wrong
Resolving a hardware conflict
Playback performance is poor.
The use of DMA dramatically increases the DVD playback
performance of your system.
To make sure DMA is turned on and to check its settings:
1
Open the
Start
menu, point to
Settings,
then click
Control
Panel
.
2
Double-click the
System
icon, then select the
Device
Manager
tab.
3
Open the
CD-ROM
device folder
,
select your DVD-ROM
device driver, then click
Properties
.
4
Select the
Settings
tab, click the
DMA
check box, then click
OK
.
The system must be restarted for this setting to take effect.
The Root or Title menu does not open.
Most DVD titles have one or both of the “Root” and “Title”
menus. If one menu button appears to do nothing, try the other
menu button.
WinDVD performance decreases after making a system
change.
DVD playback performance is dependent upon several system
resources. Changes to these system resources caused, for example,
by installing a new graphics or audio card may impact
performance. Some software changes may also impact playback
performance (for example, downloading new drivers from the
Web).
Before installing a new hardware or software component on your
system, check for any potential conflicts between its resource
requirements and your current system configuration. Also, if you
change your Operating System, check with your PC manufacturer
or your graphics card vendor to ensure that you have the
appropriate drivers for both your hardware (for example, the
Содержание 2805-S301 - Satellite - PIII 650 MHz
