Toshiba 23HLV85 - 23" LCD TV, Руководство по обслуживанию

Страница: 5 / 31

- 5 -
HANDLING THE LCD MODULE
Safety Precautions
In the event that the screen is damaged or the liquid crystal
(fluid) leaks, do not breathe in or drink this fluid
. Also, never
touch this fluid .
Such actions could cause toxicity or skin irritation . If this fluid
should enter the mouth, rinse the mouth thoroughly with wa-
ter
. If the fluid should contact the skin or clothing, wipe off
with alcohol, etc . , and rinse thoroughly with water . If the fluid
should enter the eyes, immediately rinse the eyes thoroughly
with running water
.
Precautions for Handling the LCD Module
The LCD module can easily be damaged during disassembly
or reassembly; therefore, always observe the following pre-
cautions when handling the module
.
1 . When attaching the LCD module to the LCD cover, posi-
tion it appropriately and fasten at the position where the
display can be viewed most conveniently
.
2 . Carefully align the holes at all four corners of the LCD
module with the corresponding holes in the LCD cover
and fasten with screws
. Do not strongly push on the mod-
ule because any impact can adversely affect the perform-
ance
. Also use caution when handling the polarized screen
because it can easily be damaged .
CAUTION
The metal edges of the LCD module
are sharp, handle it with care
.
3 . If the panel surface becomes soiled, wipe with cotton or a
soft cloth
. If this does not remove the soiling, breathe on
the surface and then wipe again .
If the panel surface is extremely solied, use a CRT cleaner
as a cleaner
. Wipe off the panel surface by drop the cleaner
on the cloth . Do not drop the cleaner on the panel . Pay
attention not to scratch the panel surface .
4 . Leaving water or other fluids on the panel screen for an
extended period of time can result in discoloration or
stripes
. Immediately remove any type of fluid from the
screen .
5 . Glass is used in the panel, so do not drop or strike with
hard objects
. Such actions can damage the panel .
6 . CMOS-LSI circuitry is used in the LCD module, so avoid
damage due to static electricity
. When handling the mod-
ule, use a wrist ground or anchor ground .