204
If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.1.2
WinDVD problems: general issues
WinDVD
TM
has been configured to provide optimum
performance and quality based upon your system’s available
resources. Changes made to the system or its configuration
may impact the playback performance of the WinDVD
player.
WinDVD controls are disabled.
Controls may be grayed out by commands on the DVD disc.
For example, it is common for DVD movie titles to disable
fast-forward and rewind during the legal notices at the
beginning of a movie.
Playback performance is poor.
Make sure your system’s A/C adapter is plugged in and the
system’s power setting is on full.
The Root or Title menu does not open.
Most DVD titles have one or both of the “Root” and “Title”
menus. If one menu button appears to do nothing, try the
other menu button.
WinDVD performance decreases after making a system
change.
DVD playback performance is dependent upon several
system resources. Changes to these system resources caused,
for example, by installing a new graphics or audio card may
impact performance. Some software changes may also
impact playback performance (for example, downloading
new drivers from the Web).
Before installing a new hardware or software component on
your system, check for any potential conflicts between its
resource requirements and your current system configuration.
Also, if you change your operating system, check with your
PC manufacturer or your graphics card vendor to ensure that
you have the appropriate drivers for both your hardware (for
example, the graphics card) and software (drivers must
support the operating system and DVD with WinDVD).