110
Mobile Computing
Changing the main battery
5.375 x 8.375 ver 2.1.2
6
While holding the battery release latch toward the
unlocked position, use the adjacent half-oval finger slot
nearby to gently pull the battery pack free.
WARNING: If the battery is leaking or its case is cracked, put on
protective gloves to handle it, and discard it immediately following
the advice in
“Disposing of used batteries safely” on page 113
Inserting a charged battery
1
Wipe the battery terminals of the charged battery with a
clean cloth to ensure a good connection.
2
With the battery release latch pulled toward the unlocked
position, insert the battery from the back end first at a
slight angle so that end fits evenly with the surrounding
casing. If the back end has been correctly inserted, you
will be able to gently press the front end into place until it
snaps shut. If the front end resists, don’t force it. Simply
start over.
Inserting the battery
CAUTION: Failure to lock the battery cover can result in the battery
falling out of the computer case.