Torus Power AVR2 ELITE 16 520R, Руководство пользователя

Страница: 15 / 38

12 | P a g e
AVR ELITE Embedded Software
The AVR ELITE local area network web browser interface is resident in the microprocessor on the internal
control board. There are two methods to access the software.
1)
Connect the AVR ELITE Ethernet port to a local network port and open a web browser on a PC that
is connected to the same local network. Enter AVR (or the IP address displayed on the AVR ELITE’s LCD
display) into the browser window. Press ENTER and the software will open.
2)
Use a three way DHCP Router. You then connect both PC and AVR ELITE to the same DHCP Router.
Open a browser window from the PC. Type AVR, (or the IP address displayed on the LCD) into the
browser window. Press ENTER and the software will open.
Username and Password
The password is required to change the setup of the Torus unit.
Username: admin
The username is factory set and cannot be changed.
Password: avr
This is the default password, and can be changed.
You can change your password by selecting:
Set Password
Forget your password
The AVR ELITE can be restored to the factory default password
avr by pressing and holding the button on the front panel for at
least 10 seconds.