Torqeedo Ultralight 1103 AC, Руководство по эксплуатации

Страница: 32 / 66

Start-up
DE EN
6.8 Battery power
ADVICE
The charger unit connection must be sealed off using the provided cap if charg-
ing is not taking place.
ADVICE
The battery and power supply unit must not be covered during the charging
process.
ADVICE
Charge the battery to 100 % before first use, or after a storage period of several
months, in order to calibrate the charge status display. 99 % charge is not suffi-
cient for calibration.
The batteries of models 403 A and 403 AC/1103 AC differ in their capacity. All mo-
tors can be operated using the two different batteries.
The battery can be charged during use (charge and discharge at the same time). The
power display shows only the power being drawn from the battery in this case. If the
charging current is greater than the current drawn by the motor, the power display
shows 0 W and the battery is being charged. The charge status display takes into ac-
count the charging current as well as the current drawn by the motor.
1 2 3
4
Fig. 68: Battery overview
1 Accelerator lever connection 3 Charger unit connection
2 Motor unit connection 4 Charge status display light
page 96 / 128