Toro Z Master Commercial TURBO FORCE 3000 Series, Руководство оператора

Страница: 24 / 72

g036779
Figure 24
6. Turn the ignition key to the S
TART
position
( Figure 25 ).
Note:
When the engines starts, release the key.
Important:
Do not engage starter for more
than 5 seconds at a time. If the engine fails
to start allow a 15-second cool-down period
between attempts. Failure to follow these
instructions can burn out the starter motor.
Note:
Additional starting cycles may be
required when starting the engine for the first
time after the fuel system has been without fuel
completely.
g008947
Figure 25
Shutting Off the Engine
CAUTION
Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the ignition key and engage
the parking brake when leaving the machine
unattended, even if just for a few minutes.
Let the engine idle at slow throttle (turtle) for 60
seconds before turning the ignition switch to the O
FF
position.
g029635
Figure 26
Important:
Make sure that the fuel-shutoff valve
is closed before transporting or storing the
machine, as fuel leakage may occur. Engage the
parking brake before transporting. Make sure that
you remove the key as the fuel pump may run and
cause the battery to lose charge.
24