Checking the Engine Oil Level
Before you start the engine and use the machine, check
the oil level in the engine crankcase; refer to Checking
the Engine Oil Level.
Breaking In a New Machine
New engines take time to develop full power. Mower
decks and drive systems have higher friction when new,
placing additional load on the engine. Allow 40 to 50
hours of break-in time for new machines to develop full
power and best performance.
Using the Rollover Protection
System (ROPS)
To avoid injury or death from rollover: keep the
roll bar in the raised locked position and use
the seat belt.
Ensure that the seat is secured to the machine.
There is no rollover protection when the roll bar
is in the down position.
•
Lower the roll bar only when absolutely
necessary.
•
Do not wear the seat belt when the roll bar is
in the down position.
•
Drive slowly and carefully.
•
Raise the roll bar as soon as clearance
permits.
•
Check carefully for overhead clearances (i.e.
branches, doorways, electrical wires) before
driving under any objects and do not contact
them.
Important:
Lower the roll bar only when
absolutely necessary.
Important:
Ensure that the seat is secured to the
machine.
1. To lower the roll bar, apply forward pressure to the
upper part of the roll bar.
2. Pull both knobs out and rotate them 90° so they are
not engaged (Figure 7).
3. Lower the roll bar to the down position (Figure 7).
Figure 7
1.
ROPS knob
3.
Roll bar in the upright
position
2.
Pull ROPS knob out and
rotate 90 degrees
4.
Roll bar in the folded
position
4. To raise the roll bar, raise the roll bar to the operate
position, rotate the knobs so they move partially
into the grooves (Figure 7).
5. Raise the roll bar to the full upright position while
pushing on the upper roll bar and the pins will snap
into position when the holes align with the pins
(Figure 7). Push on the roll bar and ensure that
both pins are engaged.
Important:
Always use the seat belt with the
roll bar in the raised position.
Think Safety First
Please read all safety instructions and symbols in the
safety section. Knowing this information could help
you or bystanders avoid injury.
17
Содержание Z Master 74925TE
