Toro Ultra Sonic Boom 130-8227, Руководство по установке

Страница: 2 / 8

1
Preparing the Machine
No Parts Required
Procedure
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine and remove the key.
g036361
Figure 1
CAUTION
If you leave the key in the ignition switch,
someone could accidently start the engine
and seriously injure you or other bystanders.
Remove the key from the ignition switch
before you install the kit.
2
Disconnecting the Battery
No Parts Required
Procedure
WARNING
Incorrect battery cable routing could damage
the sprayer and cables causing sparks.
Sparks can cause the battery gasses to
explode, resulting in personal injury.
Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
WARNING
Battery terminals or metal tools could short
against metal sprayer components causing
sparks. Sparks can cause the battery gasses
to explode, resulting in personal injury.
• When removing or installing the battery,
do not allow the battery terminals to touch
any metal parts of the sprayer.
• Do not allow metal tools to short between
the battery terminals and metal parts of
the sprayer.
Disconnect the battery by removing the bolt and nut
that secures the terminal of the positive-battery cable
to the positive post of the battery (
Figure 2 ).
Note:
Ensure that the terminal of the battery cable
does not touch the post.
2