Toro Ultra 51619, Руководство оператора

Страница: 3 / 12

Setup
Register your product at www.Toro.com so that Toro can notify
you in the case of a safety or warranty product recall.
g224170
Figure 2
1. Blower tube 3. Upper vacuum tube
2. Bottom inlet cover 4. Lower vacuum tube
Assembling the Blower
Important:
The motor should not run unless the bottom
inlet cover is locked in place.
Note:
If the motor runs without the bottom inlet cover in place,
do not use the appliance. Return it to an Authorized Service
Dealer.
Install the blower tube and bottom inlet cover.
g227713
Converting from Blower to
Vacuum
WARNING
The impeller rotates for a few seconds after you turn
off the appliance and can cut or injure fingers.
Do not remove the bottom inlet cover when the motor
is running or when the appliance is plugged into a
power outlet.
1. Remove the bottom inlet cover and the blower tube.
g227714
2. Install the vacuum tube and bag.
Important:
The motor should not run unless the
vacuum tube is locked in place.
Note:
If the motor runs without the vacuum tube in place,
do not use the appliance. Return it to an Authorized Service
Dealer.
g227715
3. Adjust the bag strap as needed for comfortable operation.
3