Toro titan mx, Руководство по обслуживанию, Страница: 38 / 108

CHASSIS
3-18 Toro TITAN 2014 Service Manual
3
Motion Control Assembly
1. Install the activator arm assembly (E) into the control
box and torque the pivot bolt (F) to specification –
30 ft-lbs. (40 Nm). Do not apply lubrication to the
activator arm pivot bolt (F).
2. Apply anti-seize compound to the actuator arm
shoulder bolt (C) and the (4) washers. Install the
actuator arm shoulder bolt (C) through the activator
arm (E).
3. Install the actuator arm (D) and (4) washers to the
activator arm assembly (E).
Be sure the (4) washers are positioned correctly:
• Washer 1: Standard Pivot Washer
• Washer 2: Standard Pivot Washer
• Washer 3: Standard Pivot Washer
• Washer 4: Teflon Washer
(Fig. 034)
Fig. 034
PICT-2085
3. Remove the actuator arm nut (B) and (2) washers.
4. Remove the shoulder bolt (C), actuator arm (D) and
the (2) washers from the activator arm (E) (Fig. 032).
Fig. 032 PICT-2082
5. Remove the activator arm pivot bolt and nut (F) and
the activator arm assembly (E) from the control box
(Fig. 033).
Fig. 033 PICT-2081
6. Inspect the pivot bolts, washers, nylon washers and
bushings for excessive wear, replace if necessary.
D
B
C
E
F
B
D
E
C
4 3
2
1