Specifications
Note:
Specifications and design are subject to change
without notice.
Transport width
233 cm (92 inches)
Width of cut
254 cm (100 inches)
Length
282 cm (111 inches)
Height
160 cm (63 inches)
Weight (with fluids and 8-blade
cutting units installed)
1420 kg (3,131 lb)
Engine
Yanmar 43 hp
Fuel-tank capacity
53 L (14 US gallons)
Transport speed
0 to 16 km/h (0 to 10 mph)
Mowing speed
0 to 13 km/h (0 to 8 mph)
Attachments/Accessories
A selection of Toro approved attachments and accessories
is available for use with the machine to enhance and
expand its capabilities. Contact your Authorized Service
Dealer or authorized Toro distributor or go to
www.Toro.com
for a list of all approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement parts
and accessories made by other manufacturers could be
dangerous, and such use could void the product warranty.
Operation
Note:
Determine the left and right sides of the machine
from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Never allow children or untrained people to operate or
service the machine. Local regulations may restrict
the age of the operator. The owner is responsible for
training all operators and mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Before you leave the operator’s position, do the
following:
–
Park the machine on a level surface.
–
Disengage and lower the cutting units.
–
Engage the parking brake.
–
Shut off the engine and remove the key.
–
Wait for all movement to stop.
–
Allow the machine to cool before adjusting,
servicing, cleaning, or storing it.
•
Know how to stop the machine and shut off the engine
quickly.
•
Do not operate the machine without all guards and
other safety protective devices in place and functioning
properly on the machine.
•
Before mowing, always inspect the machine to ensure
that the cutting units are in good working condition.
•
Inspect the area where you will use the machine and
remove all objects that the machine could throw.
Fuel Safety
•
Use extreme care in handling fuel. It is flammable and
its vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
•
Use only an approved fuel container.
•
Do not remove the fuel cap or fill the fuel tank while the
engine is running or hot.
•
Do not add or drain fuel in an enclosed space.
•
Do not store the machine or fuel container where there
is an open flame, spark, or pilot light, such as on a
water heater or other appliance.
•
If you spill fuel, do not attempt to start the engine; avoid
creating any source of ignition until the fuel vapors
have dissipated.
Filling the Fuel Tank
Fuel Tank Capacity
53 L (14 US gallons)
29
