Toro Reelmaster 33455, Руководство оператора

Страница: 5 / 28

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Prepare the tow vehicle.
Hitch Pin 2
2
Hairpin Cotter 2
Adjust the transport frame hitch.
Lower tower 1
Upper tower 1
Capscrew (3/8 x 2-3/4 inch) 2
U-bolt 2
3
Flange nut (3/8 inch) 6
Install the control tower.
Control levers with knobs 3
Hex nut 3
Clevis pin (5/16 x 1-1/4 inch) 3
4
Cotter pin (5/32 x 3/4 inch) 6
Mount the control linkage and levers
Supply hose 1
Return hose 1
Female dust cap 1
5
Male dust cap 1
Connect the supply/return hoses to the
tow vehicle.
Capscrew (1/2 x 3-1/2 inch) 10
Spacer 10
Locknut (1/2 inch) 10
Long shackles 4
Clevis pin (3/8 x 1-1/2 inch)
4
Cotter pin (1/8 x 3/4 inch) 4
Capscrew (3/8 x 1-1/2 inch) 1
Locknut (3/8 inch) 1
Spring 5
6
S-hook 5
Install Reelmaster mowers.
7
No parts required
–
Check the tire pressure.
5