Toro Recycler 20656 Скачать руководство пользователя страница 1

 

2005—The Toro Company

8111 Lyndale Ave., Bloomington, MN 55420, USA

Printed in the USA

All Rights Reserved

Original Instructions (EN)

Register your product at www.Toro.com

55cm Recycler

)

Lawn Mower

Model No. 20656—Serial No. 250000001 and Up

Form No. 3352-591 Rev B

Operator’s Manual

Introduction

Read this manual carefully to learn how to operate

and maintain your product properly and to avoid injury

and product damage. You are responsible for

operating the product properly and safely.
You may contact Toro directly at www.Toro.com for

product and accessory information, help finding a

dealer, or to register your product.
Whenever you need service, genuine Toro parts, or

additional information, contact an Authorized Service

Dealer or Toro Customer Service and have the model

and serial numbers of your product ready. The

illustration below identifies the location of the model

and serial numbers on the product. Write the numbers

in the space provided below:

Model #:

Serial #:

m-5607

This manual identifies potential hazards and has

safety messages identified by the following words:

Danger

 signals an extreme hazard that 

will

cause serious injury or death if you do not follow

the recommended precautions.

Warning

 signals a hazard that 

may 

cause

serious injury or death if you do not follow the

recommended precautions.

Caution

 signals a hazard that may cause minor

or moderate injury if you do not follow the

recommended precautions.

This manual uses two other words to highlight

information. 

Important:

 calls attention to special

mechanical information and 

Note:

 emphasizes

general information worthy of special attention.

Safety

This lawn mower meets or exceeds the EN 836 and

the ISO 5395 standards in effect at the time of

production.

Read and understand the contents of this manual

before the engine is ever started.

 This is the safety alert symbol. It is used to

alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol

to avoid possible injury or death.
Improperly using or maintaining this mower

could result in injury or death. To reduce this

potential, comply with the following safety

instructions.

The following instructions have been adapted from

ANSI/OPEI standard B71.1 and ISO standard 5395.

General Operation

Read, understand, and follow all instructions on

the machine and in the manual. Be thoroughly

familiar with the controls and the proper use of

the mower before starting.

Do not put hands or feet near or under rotating

parts. Keep clear of the discharge opening at all

times.

Only allow responsible individuals, who are

familiar with the instructions, to operate the

mower.

Clear the area of objects such as rocks, toys,

wire, bones, sticks etc., which could be picked up

and thrown by the blade.

Be sure the area is clear of other people before

mowing. Stop mower if anyone enters the area.

Do not operate the mower when barefoot or

wearing open sandals. Always wear substantial

foot wear.

Do not pull the mower backward unless

absolutely necessary. Look down and behind

before and while moving backward.

Do not operate the mower without proper guards,

plates, grass catcher or other safety protective

devices in place.

See the Toro instructions for proper operation and

installation of accessories. Only use Toro

accessories.

Содержание Recycler 20656

















Отзывы: