Toro ProCore 09753, Руководство по установке

Страница: 1 / 8

Form No. 3361-617 Rev A
OnePass Hitch
ProCore ® Processor
Model No. 09753—Serial No. 310000001 and Up
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
Link pin 2
Hex nut 2
Washer 2
Support arm, R.H. 1
Support arm, L.H. 1
Washer 2
Jam nut 4
Lynch pin 2
Hitch cross 1
Screw (1/2 x 2 inches) 8
Washers 16
Locknuts (1/2 inch)
8
Link pin 1
Lynch pin 1
Link pin 1
Lynch pin 1
Pin assembly 1
Screw (1/2 x 1-3/4 inches) 4
Washers 8
Locknuts (1/2 inch) 4
Pipe spacer 4
Pivot hitch 1
Washer 2
1
Locknut (1 inch) 1
Mount the support frame
Tow arm, R.H. 1
Tow arm, L.H. 1
Flag pin 2
Screw (3/8 x 1–1/4 inch) 2
Flange nut 2
Mount tab 1
Screw (1/2 x 2–1/4 inch) 4
Washer 8
2
Locknut 4
Mount the tow-arms
Hitch pin 2
3
Lynch pin 2
Mount the core processor to the aerator
© 2010—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA
All Rights Reserved