Toro Power Max 1428 OHXE Скачать руководство пользователя

Страница: 1 / 28

Form No. 3422-352 Rev A

Power Max

Heavy Duty 1428 OHXE and 1432

OHXE Snowthrower

Model No. 38860—Serial No. 400000000 and Up

Model No. 38865—Serial No. 400000000 and Up

Operator's Manual

Introduction

This machine is intended to be used by residential
homeowners. It is designed primarily for removing
snow from paved surfaces, such as driveways and
sidewalks, and other surfaces for traffic on residential
or commercial properties. It is not designed for
removing materials other than snow.

Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.

You may contact Lawn-Boy directly at
www.Lawn-Boy.com for product safety and
operation training materials, accessory information,
help finding a dealer, or to register your product.

Whenever you need service, genuine Lawn-Boy
parts, or additional information, contact an Authorized
Service Dealer or Lawn-Boy Customer Service and
have the model and serial numbers of your product
ready.

Figure 1

identifies the location of the model

and serial numbers on the product. Write the numbers
in the space provided.

Important:

With your mobile device, you can

scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.

g219961

Figure 1

Model and serial number location

Model No.

Serial No.

This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(

Figure 2

), which signals a hazard that may cause

serious injury or death if you do not follow the
recommended precautions.

g000502

Figure 2

Safety-alert symbol

This manual uses 2 words to highlight information.

Important

calls attention to special mechanical

information and

Note

emphasizes general information

worthy of special attention.

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.

Important:

If you are using this machine above

1500 m (5,000 ft) for a continuous period, ensure
that the High Altitude Kit has been installed
so that the engine meets CARB/EPA emission
regulations. The High Altitude Kit increases
engine performance while preventing spark-plug
fouling, hard starting, and increased emissions.
Once you have installed the kit, attach the
high-altitude label next to the serial decal on
the machine. Contact any Authorized Lawn-Boy
Service Dealer to obtain the proper High Altitude
Kit and high-altitude label for your machine.
To locate a dealer convenient to you, access
our website at www.Lawn-Boy.com or contact
our Lawn-Boy Customer Care Department at
the number(s) listed in your Emission Control
Warranty Statement. Remove the kit from the
engine and restore the engine to its original
factory configuration when running the engine
under 1500 m (5,000 ft). Do not operate an engine
that has been converted for high-altitude use at