Toro Power Clear 721 Скачать руководство пользователя

Страница: 3 / 24

Safety

This machine has been designed in accordance with
ANSI/OPEI B71.3 specifications.

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.

•

Read and understand the contents of this

Operator’s Manual

before you start the engine.

Ensure that everyone using this product knows
how to use it, knows how to shut off the engine
quickly, and understands the warnings.

•

Shut off the engine whenever you leave the
operating position for any reason.

•

Do not put your hands or feet near moving parts
on the machine.

•

Do not operate the machine without all guards
and other safety protective devices in place and
working.

•

Keep clear of any discharge opening. Keep
bystanders, especially small children, out of the
operating area.

•

Never allow children to operate the machine.

Содержание Power Clear 721

























Результаты поиска

Содержание Power Clear 721

Отзывы:

Похожие инструкции для Power Clear 721

Бренды по названию

Популярные бренды

Toro Power Clear 721, Руководство оператора

Результаты поиска

Содержание Power Clear 721

Отзывы:

Похожие инструкции для Power Clear 721

Бренды по названию

Популярные бренды