![Toro HoverPro 500 Machine Series Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/toro/hoverpro-500-machine-series/hoverpro-500-machine-series_operators-manual_1133591003.webp)
– Shut off the engine and wait for all moving
parts to stop.
– Disconnect the spark-plug wire from the spark
plug when adjusting cutting height.
Fuel Safety
DANGER
Fuel is extremely flammable and highly
explosive. A fire or explosion from fuel
can burn you and others and can damage
property.
•
To prevent a static charge from igniting the
fuel, place the container and/or machine
directly on the ground before filling, not in
a vehicle or on an object.
•
Fill the fuel tank outdoors, in an open area,
when the engine is cold. Wipe up any fuel
that spills.
•
Do not handle fuel when smoking or
around an open flame or sparks.
•
Store fuel in an approved container and
keep it out of the reach of children.
WARNING
Fuel is harmful or fatal if swallowed.
Long-term exposure to vapors can cause
serious injury and illness.
•
Avoid prolonged breathing of vapors.
•
Keep your hands and face away from the
nozzle and the fuel-tank opening.
•
Keep fuel away from your eyes and skin.
During Operating Safety
General Safety
•
Wear appropriate clothing, including eye
protection; slip-resistant, substantial footwear; and
hearing protection. Tie back long hair and do not
wear jewelry.
•
Do not operate the machine while ill, tired, or
under the influence of alcohol or drugs.
•
The blade is sharp; contacting the blade can result
in serious personal injury. Shut off the engine, and
wait for all moving parts to stop before leaving the
operating position.
•
When you release the operator-presence control,
the engine should shut off and the blade should
stop within 3 seconds. If not, stop using your
machine immediately and contact an Authorized
Service Dealer.
•
Operate the machine only in good visibility and
appropriate weather conditions. Do not operate
the machine when there is the risk of lighting.
•
Wet grass or leaves can cause serious injury if you
slip and contact the blade. Avoid mowing in wet
conditions, if possible.
•
Use extreme care when approaching blind
corners, shrubs, trees, or other objects that may
block your view.
•
Watch for holes, ruts, bumps, rocks, or other
hidden objects. Uneven terrain could cause a
slip-and-fall accident.
•
Stop the machine and inspect the blades after
striking an object or if there is an abnormal
vibration in the machine. Make all necessary
repairs before resuming operation.
•
Before leaving the operating position, shut off the
engine, and wait for all moving parts to stop.
•
If the engine has been running the muffler will be
hot and can severely burn you. Keep away from
the hot muffler.
•
Use accessories and attachments approved by
The Toro® Company only.
Slope Safety
WARNING
Running the engine on slopes of more than 45
degrees will cause severe engine damage due
to a lack of lubrication. Some of the potential
damage could include stuck valves, scored
pistons, or burned crank bearings.
•
Before operating on any slope, a site
survey should be completed to determine
the actual slope where the unit will be
operating.
•
Do not run the 4 cycle Honda engine in this
product on slopes of more than 45 degrees.
•
Avoid mowing wet grass. Poor footing could cause
a slip-and-fall accident.
•
Mow with caution near drop-offs, ditches, or
embankments.
•
When using the machine, always keep both hands
on the handlebar.
•
When cutting from the top of a steep slope and
you need longer reach, use an approved extended
handlebar if you need a longer reach.
3