Toro Groundsmaster 3300 Series, Руководство оператора

Страница: 10 / 68

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Remove the machine from the shipping
container.
Rear wheel 2
2
Lug nut 8
Install the rear tires (Model No. 31902
only).
3
No parts required
–
Remove the front tires (Model No.
31902 only).
Right lift arm 1
Left lift arm 1
Large pin 2
Bolt (3/8 x 2-3/4 inches) 2
Nut (3/8 inch) 6
Small pin 2
Sensor bracket 1
Carriage bolt 2
Bolt (3/8 x 1-1/4 inches) 2
4
Grease fitting 2
Install the lift-arm assembly (Model No.
31902 only).
5
No parts required
–
Install the front tires (Model No. 31902
only).
Tie-down bracket 1
Bolt (3/8 x 3-1/4 inches) 2
6
Nut (3/8 inch) 2
Install the tie-down bracket (Model No.
31902 only).
7
Seat Kit (ordered separately; refer to
your authorized Toro distributor)
1 Install the seat (Model No. 31902 only).
Steering wheel 1
8
Cover 1
Install the steering wheel (Model No.
31902 only).
Bumper 1
Bolt (3/8 x 2-3/4 inches) 2
Bolt (3/8 x 3-1/4 inches) 4
9
Nut (3/8 inch) 6
Install the bumper (Model 31902 only).
10
No parts required
–
Connecting the battery (Model No.
31902 only).
Attachment (ordered separately; refer to
your authorized Toro distributor)
1
Bolt (5/16 x 2 inches) 2
11
Nut (5/16 inch) 2
Install the attachment.
12
No parts required
–
Check the fluid levels.
13
No parts required
–
Check the tire pressure.
14
CE Kit (ordered separately; refer to your
authorized Toro distributor)
1
Installing the CE Kit (for use in
CE-compliant countries).
15
No parts required
–
Adjust the weight-transfer pressure (if
needed).
10