Toro Greensmaster eFlex 1800, Руководство по обслуживанию

Страница: 77 / 312

Disassembling the Differential Assembly
1. Remove the differential assembly from the machine; refer to Removing the
Differential Assembly (page 4–32) .
g204323
Figure 40
1. Cover index mark 2. Housing index mark
2. Remove the 6 socket-head screws that secure the cover to the housing. For
assembly purposes, note the alignment of the index marks on the housing
and cover (
Figure 40 ).
3. Place the differential assembly on workbench so that the differential is resting
on the cover with the housing orientated up.
g204324
Figure 41
1. Housing index mark 2. Pin with 2 gears 3. Pin with 1 gear
4. Lift the housing from the differential assembly leaving the internal components
positioned on the cover. For assembly purposes, note that the index mark on
the housing is aligned with a pin that has 1 gear (
Figure 41 ).
5. For assembly purposes, note the locations of the projections on the inside
of the cover. The projections need to be aligned with the pins that have 1
gear (
Figure 42 ).
6. Slide each pin with gears and spacers from cover. Note the location of the
gears and spacers on each of the 6 pins.
Greensmaster ® eFlex 1800, 2100 and 2120 Page 4–35 Traction and Reel Drive System: Service and Repairs
12189SL Rev E