Toro Greensmaster eFlex 1800, Руководство по обслуживанию

Страница: 65 / 312

Installing the Drum Drive Belt (continued)
5. Ensure that the wave washer (item 2 in Figure 28 ) is pressed into the bore of
the drum drive cover.
6. Position new gasket (item 17 in Figure 28 ) to the housing surface.
7. Slide the drum drive cover onto the drum drive assembly.
8. Install the 7 washer-head screws (item 1 in Figure 28 ) to secure the cover to
the housing. Tighten the screws as follows:
A. First, use an alternating crossing pattern, torque all the screws to 1.7 to
4.5 N∙m (15 to 40 in-lb) .
B. Again use an alternating crossing pattern, torque all the screws to 9.6 to
10.7 N∙m (85 to 95 in-lb) .
g203650
Figure 30
1. Traction lever (engaged)
2. Right handle clamp
9. Rotate the traction engage/disengage lever to the engaged position to
tension the drum drive belt ( Figure 30 ).
10. Install the rail kit wheels if they were attached; refer to Rail Kit Wheels
(Optional) (page 6–24) .
11. Install the transport wheels if they were attached; refer to Transport Wheels
(Optional) (page 6–21) .
12. Connect the battery pack; refer to Connecting the Lithium Battery Pack
(page 4–3) .
Greensmaster ® eFlex 1800, 2100 and 2120 Page 4–23 Traction and Reel Drive System: Service and Repairs
12189SL Rev E