
Form No. 3376-915 Rev A
Semi-Pneumatic Front Tire Kit
Z Master
®
Riding Mower
Model No. 78582
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
Bolt
1
Nut
1
Seal guard
2
Tire
1
Replace the tire.
Replacing the Tire
1.
Disengage the PTO, move the motion control levers to
the neutral locked position and set the parking brake.
2.
Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3.
Raise the front of the machine and support with jack
stands.
4.
Remove the existing tire.
5.
Install the new tire with the bolt, seal guards and nut
(Figure 1).
6.
Raise the machine up and remove the jack stands.
g021284
1
2
3
4
3
2 5
Figure 1
1.
Bolt
4.
Tire
2.
Fork frame
5.
Nut
3.
Seal guard
© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
*3376-915* A