Toro 78534, Руководство оператора

Страница: 11 / 28

Figure 15
72-inch Mower Deck
1. Blower assembly 3. Pivot hole
2. Mower deck 4. Blower-assembly peg
3. Close the blower assembly to see if the latches are
adjusted correctly (
Figure 16 ).
Note:
Loosen or tighten the bolt so the latches firmly
hold the blower assembly against the mower deck but
can be released by hand.
Figure 16
1. Latch 3. Blower assembly
2. Bolt
4. Install the spring as shown in Figure 17 .
Note:
Make sure that the hooks are in the correct
position.
Figure 17
1. Spring-loaded idler pulley 3. Long-hook end
2. Short-hook end
5. Pull the spring-loaded idler pulley back and route the
belt around the mower-deck pulley (
Figure 18 ).
Note:
Ensure that the belt is routed around the blower
pulleys correctly.
Figure 18
1. Mower-deck pulley 3. Blower
2. Spring-loaded Idler pulley
11