Toro 78463, Руководство оператора

Страница: 21 / 36

g018371
Figure 30
Installing the tension spring and aligning the belt
1. Blower assembly 6. Spring
2. Latch pin (locking position) 7. Idler-spring post
3. Chute bracket 8. Spring (hook end)
4. Idler-pivot bracket 9. Belt (aligned to the idler
pulley)
5. Fixed spring post
3. Move the idler-pivot bracket toward the fixed
spring post and install the spring by aligning the
spring hook onto the idler-spring post (
Figure
30 ).
Note:
Ensure that the spring hooks are
positioned correctly on the spring posts.
4. Pull the spring-loaded idler pulley away from the
fixed spring post, and route the belt around the
deck pulley (
Figure 30 ).
Note:
Ensure that the belt is correctly routed
around the blower pulley.
5. Install the blower-belt cover over the blower belt
and secure the blower-belt cover with the belt
knob (
Figure 31 ).
g341601
Figure 31
1. Cover knob 2. Blower-belt cover
21