Positioning the Flow Baffle
The following figures are only for recommended use.
Adjustments vary by grass type, moisture content, and the
height of the grass.
Note:
If the engine power draws down, and the mower
ground speed is the same, open up the baffle.
Position A
This is the full, rear position (see
). Use this position
for the following:
•
In short, light grass mowing conditions
•
In dry conditions
•
Smaller grass clippings
•
Propels grass clippings farther away from the mower
G012677
Figure 30
Position B
Use this position when bagging (
).
G012678
Figure 31
Position C
This is the full, open position (
). Use for this
position for the following:
•
In tall, dense grass mowing conditions
•
In wet conditions
•
Lowers the engine-power consumption
•
Allows increased ground speed in heavy conditions
G012679
Figure 32
Using the Mid-Size Weight
•
Install weights to improve balance. You can add or
remove weights to create optimized performance under
different mowing conditions and for your preference.
•
Add or remove weights 1 at a time until you achieve the
desired handling and balance.
Note:
Contact an Authorized Service Dealer to order a
Weight Kit.
WARNING
Excessive weight changes can affect the handling
and operation of the machine. This could cause
serious injury to you or bystanders.
•
Make weight changes in small increments only.
•
Evaluate the mower after each weight change to
ensure that you can operate the machine safely.
26
Содержание 74513
Страница 60: ...Schematics Electrical Schematic Rev A 60 ...
Страница 61: ...Notes ...
Страница 62: ...Notes ...
Страница 63: ...Notes ...