Toro 74513, Руководство оператора

Страница: 25 / 64

Adjusting the Anti-Scalp
Rollers
60-inch Models Only
Whenever you change the height-of-cut, adjust the height
of the anti-scalp rollers.
1. Disengage the blade-control switch (PTO), move the
motion-control levers to the N
EUTRAL
-
LOCK
position
and set the parking brake.
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the nut and bolt position the anti-scalp rollers
and install the nut and bolt.
4. Ensure that the spacers and bushings are installed
(
Figure 28 ).
g018324
Figure 28
1. Bushing 4. Bolt
2. Anti-scalp roller 5. Nut
3. Spacer
Adjusting the Flow Baffle
You can adjust the mower-discharge flow for different types
of mowing conditions. Position the cam lock and baffle to
provide the best quality of cut.
1. Disengage the PTO, move the motion-control levers to
the N
EUTRAL
-
LOCK
position, and set the parking brake.
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. To adjust the baffle, loosen the nut ( Figure 29 ).
4. Adjust the baffle and nut in the slot to the desired
discharge flow and tighten the nut.
g012676
1 2
Figure 29
1. Slot 2. Nut
25