Storage
Storage Safety
•
Before adjusting, cleaning, storing, or repairing the
machine, park the it on a level surface; engage
the parking brake of the traction unit; shut off the
engine; remove the key; and wait for all movement
to stop before leaving the traction unit.
•
Store the machine on the front and rear rollers
positioned on a firm, level surface so that it does
not sink or roll away.
•
Store the machine away from areas of human
activity.
•
Do not allow children to play on or around the
stored machine.
Preparing the Machine for
Storage
Important:
Do not use brackish or reclaimed
water to clean the machine.
When the machine is stored for a long period, perform
the following procedure:
1.
Clean off any dirt or grease that may have
accumulated on the machine or any of the
moving parts.
2.
Clean accumulated soil from the knives.
3.
Open the hood and clean out the inside of the
machine.
4.
Lubricate all grease fittings.
5.
Support the PTO driveshaft in the stored position
with the tether to prevent damage, or remove
the PTO and store it under the hood to minimize
corrosion.
6.
Touch up any scratches on the painted surfaces.
7.
Replace any missing or damaged decals.
8.
Store the machine inside a dry, secure building.
Inside storage reduces maintenance, gives a
longer working life, and increases the residual
value of the machine. If inside storage is not
available, cover the machine with a heavy sheet
or tarpaulin and secure it tightly.
31
Содержание 46452
Страница 7: ...g357840 Figure 3 1 Lifting point 2 Rear roller g348382 Figure 4 1 Lifting point 7...
Страница 21: ...g347982 Figure 27 1 Hairpin cotter 3 2 Hitch pin 3 21...
Страница 33: ...Notes...
Страница 34: ...Notes...