Toro 44536, Руководство оператора

Страница: 10 / 16

Note:
Secure the end of the chain to the blower side
of the PTO shaft to prevent the PTO shaft from
coming apart.
3. Slowly lower the blower until the roller and caster
wheels contact the ground.
4. Remove the lynch pin and top link pin securing the
center link to the bracket.
5. Disconnect the power shaft from the tractor PTO
shaft.
6. Slide the power shaft rearward and remove it from
the tractor.
7. Remove the lynch pins and slide the lower link arms
off the hitch pins.
9
Greasing the Blower
No Parts Required
Procedure
Before operating the blower, grease the PTO shaft to ensure
proper lubricating characteristics; refer to
Greasing the
Machine (page 12) .
Important:
Failure to properly grease the unit will
result in premature failure of critical parts.
Product Overview
Specifications
Note:
Specifications and design are subject to change
without notice.
Length 125 cm (49 inches)
Width 150 cm (59 inches)
Height
117 cm (46 inches)
Net weight 227 kg (500 lbs)
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
10