Toro 30839, Руководство оператора, Страница: 37 / 60

Lubrication
Greasing the Bearings and
Bushings
Service Interval: Every 50 hours—Lubricate all of the
bearings and bushings.
Every 500 hours/Yearly (whichever comes first)
The machine has grease fittings that you must
lubricate regularly with No. 2 lithium grease. Also,
lubricate the machine immediately after every
washing.
The grease fitting locations and quantities are as
follows:
•
Rear cutting-unit pivot ( Figure 32 )
g008894
Figure 32
•
Front cutting-unit pivot ( Figure 33 )
g008895
Figure 33
•
2 sidewinder-cylinder ends ( Figure 34 )
g008896
Figure 34
•
Steering pivot ( Figure 35 )
g008897
Figure 35
•
2 rear lift-arm pivots and lift cylinder ( Figure 36 )
g008898
Figure 36
37