Toro 30716, Руководство оператора

Страница: 7 / 24

7
Specifications
General Specifications
Width of cut 72 in. (183 cm)
Height of cut Adjustable from 1-1/2 to 4-1/2 in. (38 to 114 mm) in 1/2 in. (13 mm) increments
Cutter housing
The housing is made of 12 gauge steel and reinforced with 2-1/2 in. x 10 gauge
channel.
Cutting unit drive
A gear box mounted on the cutting unit is driven by a PTO shaft. Power is
transmitted to the blades by one hex B section belt. The spindle shafts are 1-1/4 in.
in diameter and supported by two externally sealed and graspable tapered roller
bearings.
Castor wheels
The two front castor wheels have roller bearing with 10-1/4 x 3-1/4 in. hard rubber
tires. The rear wheels have roller bearings and 8 x 3-1/2 in. hard rubber tires.
Blade tip speed At 3200 engine RPM, the blade tip speed is 15,800 ft/min. (4816 m/min.)
Cutting unit lift
The cutting unit is lifted by a hydraulic cylinder that has a 2-1/2 in. bore and
3-1/4 in. (83 mm) stroke.
Width 75 in. (191 cm)
Weight 460 lb. (209 kg)
Note: Specifications and design subject to change without notice.