Toro 29517, Руководство оператора

Страница: 9 / 60

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
3
No parts required
–
Check the battery charge.
4
No parts required
–
Checking the transmission fluid.
5
No parts required
–
Check the auxiliary hydraulic fluid level.
Media and Additional Parts
Description Qty. Use
Operator's Manual 1 Read before operating the machine.
Key 2 Start the machine.
1
Checking Tire Air Pressure
No Parts Required
Procedure
Check the air pressure in the drive tires, and adjust
the pressure as needed; refer to
Checking the Drive
Tire Air Pressure (page 38) .
Note:
You do not adjust air pressure for the
semi-pneumatic caster tires.
2
Servicing the Engine Oil
No Parts Required
Procedure
The engine is shipped with oil; check the engine-oil
level and, if necessary, add oil to the specified level;
refer to
Engine-Oil Specifications (page 32) and
Checking the Engine-Oil Level (page 32) .
3
Checking the Battery
Charge
No Parts Required
Procedure
The machine is shipped with a filled, lead-acid battery,
Check the charge of the battery and, if necessary,
charge it; refer to
Charging the Battery (page 37) .
9