Toro 29517, Руководство оператора

Страница: 51 / 60

2. Remove cooling shrouds from engine.
3. Clean cooling fins of the engine.
Note:
Also clean dust, dirt, and oil from external
surfaces of engine, which can cause improper
cooling.
4. Install the cooling shrouds into the engine.
Important:
Operating the engine without
cooling shrouds causes engine damage due
to overheating. Do not operate the machine
without the cooling shrouds.
Cleaning the Debris from
the Machine
Service Interval: Before each use or daily
1. Shut off the engine, engage the parking brake,
remove the key, and wait for all moving parts to
stop before leaving the operating position.
2. Clean off any oil, debris, or grass buildup on the
machine and aerator deck.
3. Clean off any debris or grass under the chain
guards, around the fuel tank, and around the
engine and exhaust area.
Disposing of Waste
Disposing of Waste Oil
Engine oil and hydraulic fluid are both pollutants to
the environment. Dispose of used oil at a certified
recycling center or according to your state and local
regulations.
Disposing of the Battery
DANGER
Battery electrolyte contains sulfuric acid,
which is poisonous and can cause severe
burns. Swallowing electrolyte can be fatal or
if it touches skin can cause severe burns.
• Wear safety glasses to shield eyes, and
rubber gloves to protect skin and clothing
when handling electrolyte.
• Do not swallow electrolyte.
• In the event of an accident, flush with water
and call a doctor immediately.
Federal law states that batteries should not be placed
in the garbage. Management and disposal practices
for batteries must follow relevant federal, state, or
local laws.
If a battery is being replaced or if the machine
containing the battery is no longer operating and is
being scrapped, remove the battery and take it to a
local certified recycling center. If no local recycling
is available return the battery to any certified battery
reseller.
51