Toro 29517, Руководство оператора

Страница: 12 / 60

Note:
The lockout feature is engaged each time the
engine is switched off.
Motion-Control Levers
The motion-control levers are located on each side of
the top console and control the forward and reverse
motion of the machine (
Figure 6 ).
Move the levers forward or backward to control the
drive wheel on the same side forward or reverse
respectively. The wheel speed is proportional to the
amount you move the lever.
Important:
The tines rotate when the
motion-control levers are moved out of the
N
EUTRAL
position.
g223330
Figure 6
1. Left motion-control lever 5. Forward
2. Right motion-control lever 6. Neutral
3. Front reference bar 7. Reverse
4. Front of machine 8. Rear reference bar
Multi-Function Switch
The multi-function switch is located to the left of the
hour meter/tine engagement display (
Figure 5 ).
This switch allows the operator to do the following:
•
increase or decrease the depth of aeration plug
•
lock or unlock the tine depth setting
•
reset maintenance service reminder screens
Hour Meter/Tine Engagement
Display
Smart Controller/Electronic Depth Control
The hour meter/tine engagement display is located to
the left of the ignition switch on the control console
(
Figure 5 ).
Use the hour meter/tine engagement display to show
the following information generated by the smart
controller/electronic depth control system:
Aerating Hours Electronic depth
control setting
indicator for the
tines Parking brake
indicator
Alert and Error
Messages Engine Hours Maintenance
Reminders and
Alerts
Battery voltage Interlock status LED Status Light
Refer to Using the Smart Controller/Electronic Depth
Control (page 19) for more information.
Hour Meter Display
The hour meter ( Figure 7 ) monitors and displays total
engine hours.
Note:
The engine hours display when the ignition key
is in the
OFF
position or while the engine is running.
The engine hours do not display while the machine
is aerating.
g211730
Figure 7
1. LCD Indicators/Information screen
2. Hour display
3. LED status light
Tine Engagement Display
The tine engagement display ( Figure 8 ) monitors and
shows the electronic tine depth setting.
12