background image

Form No. 3388-147 Rev A

Auxiliary Valve Kit

RT600 Traction Unit

Model No. 25445

Installation Instructions

Safety

WARNING

CALIFORNIA

Proposition 65 Warning

This product contains a chemical or chemicals

known to the State of California to cause cancer,

birth defects, or reproductive harm.

Safety and Instructional
Decals

Safety decals and instructions are easily
visible to the operator and are located near
any area of potential danger. Replace any
decal that is damaged or lost.

125-6696

1.

Rotate counterclockwise

4.

Move right

2.

Rotate clockwise

5.

Lower the guard

3.

Move left

6.

Raise the guard

© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Register at www.Toro.com.

Original Instructions (EN)

Printed in the USA

All Rights Reserved

*3388-147* A

 

Содержание 25445

Страница 1: ... harm Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger Replace any decal that is damaged or lost 125 6696 1 Rotate counterclockwise 4 Move right 2 Rotate clockwise 5 Lower the guard 3 Move left 6 Raise the guard 2014 The Toro Company 8111 Lyndale Avenue South Bloomington MN 55420 Register at www Toro...

Страница 2: ...aulic hose 30 inches 1 Directional valve assembly 1 Bolts 5 16 inch 2 Washer 2 Install the directional valve cover and assembly Short Hydraulic tube 1 Long hydraulic tube 1 Hydraulic hose 24 inches 1 90 degree fitting 5 8 inch male 3 4 inch female 2 Decal 1 Cable ties 2 Install the hydraulic hoses and the decal Preparing the Machine 1 Move the machine to a level surface 2 Set the parking brake and...

Страница 3: ...er and Assembly 1 Install the 3 clip nuts onto the new cover assembly as shown in Figure 4 Figure 4 1 Bolts M6 3 Cover 2 Clip nuts 2 Apply thread locking adhesive to the 3 bolts M6 and secure the cover to the bulkhead mount as shown in Figure 4 3 Install both of the 90 degree fittings 5 8 inch male male the Tee fitting and the 90 degree fitting 5 8 inch male 5 8 inch female onto the directional va...

Страница 4: ...90 degree fitting 5 8 inch male 3 4 inch female 2 Install the short hydraulic tube from the 90 degree fitting on top of the directional valve assembly to the closest 90 degree fitting on the bulkhead assembly as shown in Figure 7 3 Connect the 30 inch hose previously installed on the bottom of the directional valve assembly to the outside 90 degree fitting on the auxiliary valve as shown in Figure...

Отзывы: