Toro 22317, Руководство оператора

Страница: 13 / 44

Product Overview
G005159
11
10
13
8
7
14
11
3
5
12
4
6
12
3
9
2
1
Figure 5
1. Mount plate 5. Fuel tank 9. Auxiliary hydraulic couplers 13. Air cleaner
2. Tilt cylinder 6. Wheel 10. Control panel 14. Counterweight
3. Loader arms 7. Operator platform 11. Lift points
4. Lift cylinder 8. Engine 12. Handles
Controls
Become familiar with all the controls (Figure 6)
before you start the engine and operate the traction
unit.
G005160
6 3 1 5 2 4
7 8 9
Figure 6
1. Traction control levers 6. Throttle lever
2. Attachment tilt lever 7. Choke lever
3. Loader arm lever 8. Key switch
4. Auxiliary hydraulics lever
9. Hour meter
5. Speed selector lever
Key Switch
The key switch, used to start and stop the engine,
has three positions: off, run, and start.
To start the engine, rotate the key to the start
position. Release the key when engine starts and it
will move automatically to the run position.
To stop the engine, rotate the key to the off
position.
Throttle Lever
Move the control forward to increase the engine
speed and rearward to decrease speed.
Choke Lever
Before starting a cold engine, move the choke
lever forward. After the engine starts, regulate the
choke to keep the engine running smoothly. As
soon as possible, move the choke lever all the way
rearward.
Note:
A warm engine requires little or no
choking.
Traction Control Levers
To move forward, move the traction control levers
forward. To move rearward, move the traction
control levers rearward.
13