Form No. 3425-282 Rev C
Idler Kit
Blower Kit for GrandStand
®
Multi Force Mower
Model No. 139-1546
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
No parts required
–
Prepare the machine.
Idler pulley
1
Hex-flange head bolt
1
Spacer
1
Mounting bracket
1
Carriage bolt
2
Nut
3
Plate
1
Install the kit.
Preparing the Machine
1.
Park the machine on a level surface.
2.
Disengage the PTO, engage the parking brake,
and move the motion-control levers outward to
the N
EUTRAL
-L
OCK
position.
3.
Shut off the engine and remove the key.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3425-282* C