Toro 137-5470, Инструкция по установке

Страница: 2 / 4

g221203
Figure 3
1. Rear shroud 3. Flange screws (remove
from both sides)
2. Flange screws (loosen
these)
6. Remove the 4 screws that secure the battery
cover to the machine and remove the cover
(
Figure 4 ).
g221204
Figure 4
1. Battery cover 2. Screw
Installing the Cables
1. Disconnect and discard the positive (red) battery
cable from the positive battery jump post,
the battery post connector, and the 12VDC
alternator (
Figure 5 and Figure 6 ).
Note:
Keep the removed nuts for later
installation.
g221400
Figure 5
1. Positive battery jump post 3. 12VDC Alternator
2. Existing cable routing 4. Alternator cable
connection
g221412
Figure 6
1. Rear of battery-disconnect
switch
3. Existing cable routing
2. Positive (+) battery jump
post
4. Battery post connector
2