Страница 1: ...ed Procedure 1 Park the sprayer on a flat surface lower the booms set the parking brake stop the engine and remove the key 2 Disconnect battery negative cable Step 2 Removing the Foot Switch No Parts Required Procedure 1 Disconnect Sprayer Foot Switch connector under floor pan 2 Remove the retaining nut and remove the sprayer foot switch from the floor pan Discard the foot switch 3 Remove the bolt se...
Страница 2: ... the new switch and drill two 1 4 inch holes in the floor pan at drill points marked in the previous step 3 Mount the new floor switch using the two hex head screws 1 4 inch two lock washers 1 4 inch and two nuts 1 4 inch provided in loose parts Figure 2 Figure 2 1 New oor switch 3 Lock washer 1 4 inch 2 Hex head screw 1 4 inch 4 Nut 1 4 inch 4 Connect the three prong connector on the new wiring har...
Страница 3: ...6 Use wire ties to secure the relays and harness to the frame under the dash as shown in Figure 3 7 Reconnect the battery 8 Test for proper floor switch function 3 ...
Страница 4: ......