Form No. 3353-635 Rev A
Left- and Right-Hand Gearcase Assemblies
For Power Max®, Power Shift® and 824XL Power Throw
Snowthrowers
Model No. 108-7325
Model No. 108-7327
Installation Instructions
Figure 1
1. Auger shaft
5. Helical gear
9. Screw
13. Thrust bearing (0.078 inch
thick)
2. Right-hand gearcase
assembly
6. Pipe plug
10. Worm bushing
14. Thrust bearing (0.125 inch
thick)
3. Gasket
7. Left-hand gearcase assembly11. Impeller shaft
15. Input bushing
4. Thrust washer
8. Woodruff key
12. Retaining ring
16. Oil seal
Disassembling the Gearcase
1. Remove the gearcase assembly from the
snowthrower.
Note:
Refer to service manual 492-9138 or
492-0354.
2. Disassemble the gearcase assembly.
3. Remove and discard the old gasket (if
applicable).
© 2005—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
