Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
decal145-1772
145-1772
1.
Warning—read the
Operator’s Manual
.
4.
Warning—stay away from moving
parts; keep all guards and shields in
place.
7.
Tipping hazard—do not use dual ramps
when loading onto a trailer; use 1 ramp
wide enough for the machine; use a
ramp with a slope less than 15°; back
up the ramp when loading the machine
and drive forward off the ramp when
unloading.
2.
Warning—all operators should be
trained before operating the machine.
5.
Thrown object hazard—keep
bystanders away.
8.
Tipping hazard—do not turn sharply
while traveling fast; drive slowly when
turning; do not use the machine near
drop-offs or on slopes; stay at least
2 widths of the machine away from
drop-offs.
3.
Warning—wear hearing protection.
6.
Warning—engage the parking brake,
shut off the engine, and remove the
key before leaving the machine or
performing maintenance.
decal145-1764
145-1764
1.
Raise/lower the mid-mount attachment
4.
Fast
2.
Tilt the mid-mount attachment forward/backward
5.
Slow
3.
Raise/lower the rear attachment
5
Содержание 08839
Страница 29: ...9 Adjust the tilt of the multi tool carrier as needed Figure 39 g359127 Figure 39 29...
Страница 62: ...Notes...
