g249812
Figure 1
1.
InfoCenter display
2.
Buttons used to select
menu icons
g251108
Figure 2
1.
Alert area
3.
Mode and function status
bar
2.
Machine speed
Advisory Example
Advisories communicate helpful information about
normal machine behavior. An advisory is basic
information noting the computer has detected the
machine has an incorrect operating condition. Follow
the instructions on the screen to correct the issue. The
graphic below shows a sample of what an advisory
displays on the screen.
Note:
Usually, an advisory is a temporary response to
an operator action and explains why it has prevented
an action.
g251106
Figure 3
1.
Issue—describes the
machine action
4.
Universal advisory
code—use for reference
to the advisory
2.
Cause—identifies the
reason the machine took
the action
5.
Instructions to suppress
the advisory
3.
Remedy—action to be
taken by the operator to
resolve the issue
Status Display
This display allows you to view the fuel level, coolant
temperature, hydraulic-fluid temperature, battery
voltage, engine speed, the 3-point maximum height
for transporting, and the maximum and minimum
height for running a 3-point, PTO attachment. This
also displays all the active machine or engine fault
codes (
Push the status display switch to toggle through the
different available screens. See the following figures
for the available screens.
Note:
See your authorized Toro distributor for the
Fault Code Manual or the Yanmar
®
engine manual
for engine faults.
g249605
Figure 4
1.
Status display screen
2.
Status display switch
2
