Installing Hydraulic Hoses and Tubes (O-Ring Face Seal)
(continued)
Hose/Tube Installation Torque Table
Fitting Dash Size
Hose/Tube Side Thread Size
(inch)—threads per inch)
Installation Torque
4
9/16—18
25 to 29 N∙m (18 to 22 ft-lb)
6
11/16—16
37 to 44 N∙m (27 to 33 ft-lb)
8
13/16—16
51 to 63 N∙m (37 to 47 ft-lb)
10
1—14
82 to 100 N∙m (60 to 74 ft-lb)
12
1–3/16—12
116 to 142 N∙m (85 to 105 ft-lb)
16
1–7/16—12
150 to 184 N∙m (110 to 136 ft-lb)
20
1–11/16—12
190 to 233 N∙m (140 to 172 ft-lb)
Flats From Wrench Resistance Table
Size
FFWR
4 (1/4 inch nominal hose or tubing)
1/2 to 3/4
6 (3/8 inch)
1/2 to 3/4
8 (1/2 inch)
1/2 to 3/4
10 (5/8 inch)
1/2 to 3/4
12 (3/4 inch)
1/3 to 1/2
16 (1 inch)
1/3 to 1/2
5. If a torque wrench is not available or if space at the swivel nut prevents the
use of a torque wrench, use the alternative procedure Flats From Wrench
Resistance (FFWR) given below.
A. Use a wrench to tighten the swivel nut onto the fitting until you feel light
resistance with the wrench—approximately
3.39 N∙m (30 in-lb)
.
B. Put a mark on the swivel nut and body of the fitting (item 1
). If
connecting a hose, hold the hose in alignment with a wrench to prevent
the hose from turning.
C. Use a wrench to tighten the nut to the correct Flats From Wrench
Resistance (compare items 2 and 3 in
Outcross 9060
Page 5–9
Hydraulic System: General Information
18234SL Rev B
Содержание 07511AA
