Form No. 3360-173 Rev A
Light Kit
2008 and later Greensmaster
®
Walk Behing Mowers
Model No. 04061
Installation Instructions
Before servicing or making adjustments to the machine, stop engine and remove the wire from the
spark plug.
Installing the Lights
For Greensmaster Flex 18
1. Align the
inner
set of light bracket mounting holes
with the handle. The light bracket should extend
outward from the handle (Figure 1).
Figure 1
1.
Light bracket
2.
Light
2. Loosely secure the light bracket to the handle with a
clamp and two nylon insert locknuts (Figure 1).
3. Position the light bracket approximately 6" below
the console.
4. Tighten the two nylon insert locknuts (Figure 1).
5. Using the
outer
mounting hole in the light bracket,
mount the light to the bracket with a carriage bolt,
lock washer and nut (Figure 1).
For Greensmaster Flex 21,
Greensmaster 1000, Greensmaster
1600, Greensmaster 2000 and
Greensmaster 2600
1. Align the
outer
set of light bracket mounting holes
with the handle. The light bracket should extend
inward from the handle (Figure 2).
Figure 2
1.
Light bracket
2.
Light
2. Loosely secure the light bracket to the handle with a
clamp and two nylon insert locknuts (Figure 2).
3. Position the light bracket approximately 6" below
the console.
4. Tighten the two nylon insert locknuts (Figure 2).
5. Using the
outer
mounting hole in the light bracket,
mount the light to the bracket with a carriage bolt,
lock washer and nut (Figure 2).
© 2008—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
