tornos MultiAlpha 6x32 Скачать руководство пользователя страница 54

Страница: 54 / 90

5. Machine use - Safety instructions MultiAlpha 6x32

300940 en - 03/11

5-16

5.8.

Opening/closing machining doors

Danger !

The fire-fighting system is deactivated when the doors are opened.

If a fire breaks out while an operator is working in the machining area, the oper
ator must immediately move away and shut the doors.

Warning !

Do not open a door without first turning off the power.

Warning !

Doors locked and safety key on CONTINUOUS CYCLE mode, all movements and
all axis rotations are authorised.

Warning !

Doors locked and safety key on SETTING mode, all movements and all axis rota
tions are authorised.

Warning !

Doors open and safety key on CONTINUOUS CYCLE mode, the machine power
is off. All movements and all axis rotations are impossible.

Warning !

Doors open, safety key on SETTING mode and mode selector on automatic mode
or MDI, all movements and all axis rotations are authorised in certain conditions:

- movement of the linear axes is limited to 2m/min with operator hold to run
action.
- axis rotation is limited to operator hold to run action.

Certain controls (M codes), which are not dangerous for the operator, are
authorised.

Содержание MultiAlpha 6x32



























































































Результаты поиска

Содержание MultiAlpha 6x32

Отзывы:

Похожие инструкции для MultiAlpha 6x32

Бренды по названию

Популярные бренды

tornos MultiAlpha 6x32, Инструкции по безопасности

Результаты поиска

Содержание MultiAlpha 6x32

Отзывы:

Похожие инструкции для MultiAlpha 6x32

Бренды по названию

Популярные бренды