17
MAINTENANCE
Squeegee Adjustment
Before resuming operation, check the
squeegee blades for proper engagement to
the floor.
First, lower the squeegee and push or drive
the machine forward several inches, then
look at the consistency of the rear blade flex
all along its length as it rests on the floor. If
the rear blade does not appear evenly
loaded, readjust the squeegee assembly
using the directions below.
Loosen the two rocker thumbscrews. Hold
the squeegee and rotate it forward or
rearward until the squeegee blades contact
the floor evenly. Tighten the rocker
thumbscrews.
Push the machine forward slightly and
recheck for even blade contact.
Replacement Blade Part Numbers:
Standard K62732150
Oil Resistant K62732090
Non-Marking Oil-Resistant K62732060
https://harrissupplyind.com - To Order Parts Call 608-268-8080
