background image

13

TORNADO FLOORKEEPER

PREVENTIVE MAINTENANCE PROGRAM

Introduction

This section is designed to instruct your personnel in methods of maintenance on the Tornado

Long-Range Floorkeeper

. By following these procedures, repair costs and down time will be

greatly reduced. These procedures are for simple repairs that can easily be done by your own

personnel.

WARNING

Battery acid is toxic and corrosive; avoid bodily
contact.

First Aid:

EYES:

Wash with liberal quantities of running

water for 15 minutes.

SKIN:

Flush area with plentiful amounts of

running water.

INGESTION: Give milk to drink, DO NOT induce

vomiting, call a physician.

SPILLS:

Wash with water or neutralize with

sodium carbonate or bicarbonate

(baking soda).

Battery Care

Batteries must be checked daily. The water level

must be maintained at least 1/4” above top of cell

plates in each battery.

1. Raise top covers and lock in place.

2. Remove battery caps and fill.

NOTE: Fill batteries with distilled water only. This

will increase battery life substantially.

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Содержание Floorkeeper 99328





























Отзывы: